Pearl Drummers Forum - Powered by vBulletin

Results 1 to 10 of 10
  1. Registered User

    Join Date
    Oct 2019
    Posts
    14

    Question Pearl version of TAMA CYA5E

    Hello!

    Does Pearl have any hardware akin to TAMA's CYA5E?

    I want to mount 3 splashes in sequence whilst minimising clutter i.e. excess hardware/stands.

  2. Registered User

    Join Date
    Jun 2005
    Location
    CLT
    Posts
    2,292

    Default

    If the Tama piece does what you need, why not just use the Tama piece?

    But in the interest of answering your question, I would encourage you to peruse the following link to see if you can find something that fits your needs.

    https://pearldrum.com/products/hardw...olders/#ch830s

  3. NO KIT TOO BIG

    Join Date
    Dec 2015
    Location
    UK
    Posts
    1,001

    Default

    Short answer is no, but Gibraltar make something similar too, which is what I use. You could always just replace all of the wing nuts and no one would be any the wiser.
    Pearl, Natal, Ludwig, Tama, Slingerland, Premier Drums
    Zildjian, Sabian, Zyn Cymbals
    PEARL, LUDWIG, TAMA, YAMAHA, NATAL and DW Snares

    Roland, Dauz, FAT KAT and Koby Electronics, and loads of Percussion

    4 Kits and 8 Snares, and I still don't have enough!

  4. Registered User

    Join Date
    Dec 2003
    Location
    West Virginia, USA
    Posts
    1,180

    Default

    Quote Originally Posted by RushDrums24 View Post
    Short answer is no, but Gibraltar make something similar too, which is what I use. You could always just replace all of the wing nuts and no one would be any the wiser.
    I think this is the Gibraltar part you are referring to. https://www.gibraltarhardware.com/product/sc-clra/

  5. The Hardware Guy

    Join Date
    Jan 2004
    Location
    London-ish
    Posts
    14,550

    Default

    Quote Originally Posted by HPD260 View Post
    If the Tama piece does what you need, why not just use the Tama piece?
    This

    PEARL CZX "CUSTOM Z" ALL MAPLE
    22", 22", 8", 10", 12", 13", 14", 16", 18"
    PICSPICS 2
    “After silence, that which comes nearest to expressing the inexpressible is music.”
    Click Here To Help My Next Epic Search Quest

  6. Registered User

    Join Date
    Oct 2019
    Posts
    14

    Default

    Quote Originally Posted by HPD260 View Post
    If the Tama piece does what you need, why not just use the Tama piece?

    But in the interest of answering your question, I would encourage you to peruse the following link to see if you can find something that fits your needs.

    https://pearldrum.com/products/hardw...olders/#ch830s
    I have a thing for Pearl.

    Thank you for the link!
    I have come across these online but they don't quite fit the role the CYA5E play. I would only be able to place 2 side by side using an ADP30, shich is more dear, but nonethless a plausible solution.

  7. Registered User

    Join Date
    Oct 2019
    Posts
    14

    Default

    Quote Originally Posted by RushDrums24 View Post
    Short answer is no, but Gibraltar make something similar too, which is what I use. You could always just replace all of the wing nuts and no one would be any the wiser.
    Shame, really. I was looking forward to splurging on some quality Pearl products. I suppose TAMA it is!

    How is your experience with the Gibraltar's?

  8. NO KIT TOO BIG

    Join Date
    Dec 2015
    Location
    UK
    Posts
    1,001

    Default

    Quote Originally Posted by Megyalila Ballad View Post
    Shame, really. I was looking forward to splurging on some quality Pearl products. I suppose TAMA it is!

    How is your experience with the Gibraltar's?
    Excellent, nothing at all bad to say, they do the job perfectly and have more adjustment than the tamas, otherwise both are pretty much the same. I also found the Gibraltar far cheaper here in the UK than the Tama, but no loss in quality.
    Pearl, Natal, Ludwig, Tama, Slingerland, Premier Drums
    Zildjian, Sabian, Zyn Cymbals
    PEARL, LUDWIG, TAMA, YAMAHA, NATAL and DW Snares

    Roland, Dauz, FAT KAT and Koby Electronics, and loads of Percussion

    4 Kits and 8 Snares, and I still don't have enough!

  9. Registered User

    Join Date
    Oct 2019
    Posts
    14

    Default

    Success!!!

    I just passed by the Pearl CHC200 and noticed the part the cymbal attaches to might do the job, so I did a bit of research and found the Pearl TL-2030!!!

    Here's a picture of how it looks like:

    And another one:
    Attached Images Attached Images   

  10. th droids yerlookn4

    Join Date
    Oct 2002
    Location
    massachusetts
    Posts
    5,665

    Default

    i was just this, after lookin at the gibraltar vid .. i was like what? of course pearl makes a piece like this , its part of the advanced hardware line from a few years back ..

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •