Pearl Drummers Forum - Powered by vBulletin

Results 1 to 7 of 7
  1. Registered User

    Join Date
    Sep 2017
    Posts
    4

    Default Thoughts on Mimic Pro, Midi and my setup

    I currently have my mimic pro setup so I can explore the various ways to get the performance to the DAW. I'm basically using all of the audio outs (including the DB25) and the MIDI. I set up the midi in my DAW so it records the midi notes as I play but also, so I can send the midi notes from the DAW to the module and switch kits/sounds post-recording.

    The issue I am running into is that the midi notes seem to hit harder and have less dynamics than if I were to capture the audio straight from the first performance. I am not 100% sure if this can be helped or adjusted in the module.

    My thought is to adjust the trigger velocity amps to see if that helps with the midi note dynamics. When I first received the module a few months back, I adjusted the velocity amps so I could practice quietly but still trigger harder hits. Even though the ghost notes sound OK when I play them through the module, the MIDI notes are too heavy. I also realize the mimic has a ton more velocity layers/samples than midi... So it will never be a 1-for-1 translation.

    Overall, I'm loving all the I/O the mimic has to offer. It's really allowing me to explore the full extent of its possibilities.

    If anyone has any ideas, thoughts or questions. Please ask.

  2. Registered User

    Join Date
    Sep 2016
    Posts
    28

    Default

    be sure you have the latest firmware v1.4 You should never touch the velocity amp and volume amp these are for older pad that have issue, these will ruin dynamic in mimic and midi, set them back to default 25 I think.

    Configure MIMIC correctly:

    -Input gain, increase until the ghost notes start appears, the lightness hit possible, normally between 5 and 10 for snare\toms
    -Top velocity is the max highest sample , normally between1200 to 1300 range

    -Dynamic fader is for the ghost notes level, 100 means quietest, 0 loudest.
    -Keep curve linear

  3. e-Pro Live Specialist

    Join Date
    Apr 2010
    Location
    Music City
    Posts
    303

    Default

    Hi,

    We have encountered some midi compatibility issues that needed to be addressed.

    The engineers have been working night and day to fix these problems and they will be included in the next update.
    Bob Sabellico - Product Manager - Pearl Electronic Percussion Division

  4. Registered User

    Join Date
    Sep 2017
    Posts
    4

    Default

    Quote Originally Posted by Chrisk View Post
    be sure you have the latest firmware v1.4 You should never touch the velocity amp and volume amp these are for older pad that have issue, these will ruin dynamic in mimic and midi, set them back to default 25 I think.

    Configure MIMIC correctly:

    -Input gain, increase until the ghost notes start appears, the lightness hit possible, normally between 5 and 10 for snare\toms
    -Top velocity is the max highest sample , normally between1200 to 1300 range

    -Dynamic fader is for the ghost notes level, 100 means quietest, 0 loudest.
    -Keep curve linear
    Thanks, I'll be sure to try this

  5. Registered User

    Join Date
    Sep 2017
    Posts
    4

    Default

    Quote Originally Posted by Bob Sabellico View Post
    Hi,

    We have encountered some midi compatibility issues that needed to be addressed.

    The engineers have been working night and day to fix these problems and they will be included in the next update.
    Good to hear its not just me. Thanks! I'll wait for an update

  6. Registered User

    Join Date
    Nov 2016
    Posts
    19

    Default

    I have the pearl e pro kit, now I’m thinkimg of upgrading to the mimic pro, but have a couple questions you might be able to help with. Can you add your own samples? Can you use it with other brands pads, ie, I have some ddrums and acupads I would like to use with my hybrid set up.

  7. e-Pro Live Specialist

    Join Date
    Apr 2010
    Location
    Music City
    Posts
    303

    Default

    Quote Originally Posted by Drumzrfun View Post
    I have the pearl e pro kit, now Iím thinkimg of upgrading to the mimic pro, but have a couple questions you might be able to help with. Can you add your own samples? Can you use it with other brands pads, ie, I have some ddrums and acupads I would like to use with my hybrid set up.
    Hi,

    Yes you can add stereo wave files but not multi samples at this point.

    It works with a laundry list of pads and if it is not in the trigger list, you can use one of the presets that has the same triggers setup as your pads for a template.
    Bob Sabellico - Product Manager - Pearl Electronic Percussion Division

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •