Pearl Drummers Forum - Powered by vBulletin

Results 1 to 9 of 9
  1. Practicing...

    Join Date
    Jan 2007
    Location
    Phoenix, AZ
    Posts
    1,392

    Default New Masters Maple Reserve Problem

    Hey PDF, long time no talk!

    GREAT NEWS: I ordered an MRV set back in February (22x16"; 12x8"; 16x16") and finally picked it up from the shop I ordered through last week!

    BAD NEWS: My 16x16" floor tom is rattling and I cannot figure out why. As a note the drums come stocked with Remo Ambassadors. I have taken both heads off and made sure that the screws holding in the lug housings and floor tom leg mounts were not loose or over tight; When I took both heads off I made sure the bearing edges were clean; I changed the batter head in case the head was defective. I made sure the none of the tension rods were loose after tuning. I even took the drum to different rooms to ensure that it wasn't something in the room that was rattlings due to the resonance.

    I am at a loss for what to do next. I feel like I have done all of the steps necessary to rule out obvious issues. Maybe I could swap out the stock resonant head? If that still doesn't work does that mean it is a problem with the shell itself? And if it is a problem with the shell itself can I get it replaced? These drums are new and not cheap and they should not be rattling.

    Thank you in advance!

  2. Registered User

    Join Date
    May 2014
    Location
    Pennsylvania
    Posts
    290

    Default

    Did you hit the drum shell with your hand while all the heads/rims/tension rods were off? I had this issue when I got my MMX kit used 3 years ago. It turned out to be the air hole grommet. I tightened it and it's been fine ever since!
    Pearl Professional DLX - 8,10,12,13,16,22 Wine Red
    Pearl MMX - 10, 12, 14, 16, 22 Diamond Burst

  3. Practicing...

    Join Date
    Jan 2007
    Location
    Phoenix, AZ
    Posts
    1,392

    Default

    I did, and I still heard the rattle that way. I even remembered to check the badge but I didn't check the air hole grommet! I will definitely give that a shot!

  4. Playing since 1976

    Join Date
    Sep 2012
    Location
    USA
    Posts
    7,660

    Default

    It's likely the press-fit air vent. If you watch my video, I explain how to gently tighten them.

    I'M INTERESTED IN SELLING SOME OF MY PEARL SNARE DRUMS. IF YOU WANT TO CHECK THEM OUT, CLICK THE LINK FOR MY WEBSITE BELOW. GO TO DRUMS/SNARE DRUMS. FEEL FREE TO MESSAGE ME WITH ANY QUESTIONS OR OFFERS.

    My website ===> CLICK HERE
    My eBay auctions ===> CLICK HERE


  5. Registered User

    Join Date
    Nov 2012
    Location
    Ga
    Posts
    150

    Default

    Quote Originally Posted by Drumming-4-Life View Post
    It's likely the press-fit air vent. If you watch my video, I explain how to gently tighten them.

    I have watched this Video- This is likely the cause these drums are very thin and that vent is a common problem that is not as common on the thicker MRX, MCX, and Retro shells , Good Luck Let everyone know you got it fixed ... I have been trying to Trade my DW collectors for one of these new Master Maple Reserve's or I am going to Add some other toms to my MMX kit Good luck
    Needing 12x9 MMX TOM have 12x 10 available

    MMX 14 x 6.5 SNARE GOLD Hdw
    Purple Mist
    For Sale
    MMX 14x6.5 Gold HDW
    purple Mist snare

  6. Practicing...

    Join Date
    Jan 2007
    Location
    Phoenix, AZ
    Posts
    1,392

    Default

    Quote Originally Posted by Drumming-4-Life View Post
    It's likely the press-fit air vent. If you watch my video, I explain how to gently tighten them.

    That was a great video thank you! I may give it a try BUT last night I decided to say screw it and replace the resonant head and the rattle seems to have gone away. Just a reminder that a stock head is still a stock head even if its a Remo. I'm going to play some more today to make sure it hasn't resurfaced and if it does I will definitely give this a shot to gently tighten the gasket.

  7. bangin since '95

    Join Date
    Jan 2009
    Location
    Roanoke, VA
    Posts
    301

    Default

    It could be that 1 or more of the lugs are rattling, and it has nothing to do with the screws or anything. Try taking the lugs off of the drum and putting some cotton balls (or similar) in there and see if that stops it. If not, contact Pearl.
    DW Performance Series Drums- Black Diamond Pearl -Sabian Cymbals-Pro-Mark Sticks-Remo Drumheads

    https://www.pearldrummersforum.com/s...Diamond-Pearl!

  8. Registered User

    Join Date
    Nov 2012
    Location
    Ga
    Posts
    150

    Default

    Can you give us an update on this issue , This is an awesome kit any more info would be great
    Needing 12x9 MMX TOM have 12x 10 available

    MMX 14 x 6.5 SNARE GOLD Hdw
    Purple Mist
    For Sale
    MMX 14x6.5 Gold HDW
    purple Mist snare

  9. Thwunk

    Join Date
    May 2014
    Location
    Bristol, UK
    Posts
    333

    Default

    Quote Originally Posted by Thrashed View Post
    That was a great video thank you! I may give it a try BUT last night I decided to say screw it and replace the resonant head and the rattle seems to have gone away. Just a reminder that a stock head is still a stock head even if its a Remo. I'm going to play some more today to make sure it hasn't resurfaced and if it does I will definitely give this a shot to gently tighten the gasket.
    Glad you sorted it out! Nothing worse than a mystery rattle...
    HHX & 70s Zildjian New Beat hats, K crashes, Bosphorus & Agop rides
    Snares: Yamaha Bamboo Custom 6.5x14 & 5.5x14 / Ludwig Classic Maple 8x14, LB402B (COB Supraphonic 6.5x14), Acrolite 5x14
    Pearl Reference Pure (matte walnut) / Yamaha Maple Custom Absolute (plum lacquer)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •